logo
Enviar mensagem
Shenzhen Jianheng Technology Co., Ltd. 0086-137-25559416 alan@liion-batt.com
High-Capacity 6850mAh 7.2V Lithium Ion Battery Pack for Smart Locks with Lightweight Design

High-Capacity 6850mAh 7.2V Lithium Ion Battery Pack for Smart Locks with Lightweight Design

  • Destacar

    High-Capacity 6850mAh Lithium Ion Battery

    ,

    7.2V Voltage Smart Lock Battery

    ,

    Lightweight Rechargeable Battery Pack

  • NOME
    Bateria de íon-lítio 735589-6850mAh para fechaduras inteligentes
  • ODM
    Design personalizado gratuito para pacotes
  • Capacidade
    6850mAh
  • Cátodo
    Óxido de lítio-níquel-manganês-cobalto (Li-NMC)
  • Tipo
    Célula de íon de lítio recarregável de bolsa
  • Tensão
    7.2V
  • Carga
    1C máximo
  • Descarga
    2,5°C máx.
  • Temperatura operacional
    Carregamento: 0°C a 45°C; Descarga: -20°C a 60°C
  • Ciclo Life
    Mais de 500 ciclos com capacidade ≥80%
  • Peso
    ≤210g
  • Resistência interna
    ≤140mΩ (CA 1000Hz)
  • Dimensões
    17,3*59,8*101,5
  • Lugar de origem
    CHINA
  • Marca
    OiD
  • Certificação
    Compliant with UL1642, IEC/EN6196, and GB/T 18287-2013 standards
  • Número do modelo
    735589-6850mAh
  • Quantidade de ordem mínima
    Negociável
  • Preço
    negotiable
  • Detalhes da embalagem
    Carton
  • Tempo de entrega
    3 ~ 30 dias
  • Termos de pagamento
    L/C, T/T, Western Union
  • Habilidade da fonte
    100000

High-Capacity 6850mAh 7.2V Lithium Ion Battery Pack for Smart Locks with Lightweight Design

Product Name: 735589-6850mAh Li-ion Battery Pack for Smart Locks

Key Features:

  • Extended Usage Time: With a large 6735mAh capacity, this battery significantly reduces how often you need to recharge your smart lock.
  • Stable Voltage Output: Maintains consistent performance for all electronic components within the smart lock system.
  • Built-in Protection Circuitry: Ensures safe operation by guarding against over-charge, over-discharge, short circuit, and other potential issues.

Technical Specifications Table:

Parameter Specification Details / Conditions
Model Number 735589-6850mAh
Configuration 2S1P Two cells in series, one in parallel.
Nominal Voltage 7.2V
Rated Capacity (Cmin) 6735mAh Measured at 0.2C discharge rate down to 6.0V at room temperature (25°C ±2°C).
Typical Capacity ~6850mAh
Energy 49.32Wh Calculated from nominal voltage and rated capacity.</tr></table>

Detailed Electrical Parameters:

Parameter Value Unit Conditions / Notes
Charge


Standard Charge Current 0.2C (~1347mA) CCCV method, cut-off at 0.02C.
Max. Continuous Charge Current 1C A
Max. Charge Current (>45°C) 0.5C A
Charge Cut-off Voltage 8.5V Per pack.
Charge Temperature Range 0°C to 45°C

Discharge


   Standard Discharge Current 0.2C mA
Max. Continuous Discharge Current 2.5C A
Peak Discharge Current (pulse) >3.5A For very short durations, like motor startup.
Discharge End Voltage 6.0V Recommended termination point.
Discharge Cut-off Voltage 5.5V Minimum safe load voltage for the pack.>Note: The protection circuit will activate if the voltage drops below this level during operation.
Discharge Temperature Range -20°C to 60°C

Additional Key Parameters:

  • Internal Resistance: ≤140mΩ (initial, AC method at 25°C±2°C). 
  • Weight : Approximately 210g
  • Dimensions (L x W x H) : 17.3mm x 59.8mm x 101.5mm
  • Cycle Life:  ≥500 cycles, To 80% initial capacity retention.
  • Self-Discharge Rate: <3% per month, At room temperature (20°C ±5°C), recoverable after charging

Operating & Storage Environment:

Condition Temperature Range Relative Humidity
Operation -20°C to 60°C ≤95% RH
Storage -10°C to 45°C Short-term storage recommendation.
Recommended StorageRecommended Storage State 50%-70% State of Charge (SoC) For non-air transport.
Storage (for air transport) SOC ≤30% As per IATA regulations.

Important Notes for Optimal Performance & Safety:

  • Use only with the specified smart lock charging circuit.
  • Do not exceed the maximum charge and discharge currents specified.
  • Avoid exposing the battery to temperatures outside its specified range.
  • If the battery surface temperature exceeds 60°C during use, allow it to cool completely before attempting another charge or discharge cycle.
  • Adhere to all specified charge and dischage parameters to maximize lifespan and safety.

Certifications & Compliance: The battery pack is designed and tested to meet relevant international standards for safety and performance. Specific certifications may apply depending on the final configuration and customer requirements.

Integration & Compatibility:

This battery is engineered as a direct power source replacement for compatible smart lock models. Ensure compatibility with your device's voltage and connector specifications before purchase.

For detailed integration guides or technical support, please consult the product documentation or contact authorized service providers.